ALUX 1192 SS-60 SETALUX 1192 SS-60an acrylic polyol with 3.8 % OH (calculated on non-volatiles) Technical featuresIn combination with aliphatic poly-isocyanates: very fast drying at 60 °C and room temperature, excellentappearance, easy application, good outdoor durability, good adhesion results on metallic base-coats, goodyellowing resistance in accelarated weathering tests.ApplicationVarnishes, clearcoats and solid colour systems for car repair (cars, trains and tram units etc.) Industrialtopcoats (big rolling stock).Solvent composition Butyl acetateSpecificationsProperty Value Unit MethodSTM* ISOAcid value (as such) 3.0 - 5.0 mg KOH/g 303A 3682Appearance clear and clean 017A Colour APHA (Lico 200) Max. 35 APHA 008F 6271Non-Volatiles 60 - 62 % 001G 3251Viscosity (23 °C at 100 s
) (at 60%) 1.9 - 3.8 Pa.s 012J 3219Viscosity (23 °C at 100 s
) (at 61%) 2.3 - 4.6 Pa.s 012J 3219Viscosity (23 °C at 100 s
) (at 62%) 2.7 - 5.4 Pa.s 012J 3219* STM: Nuplex Resins method of determination (available on request)Typical properties (not to be used as sales specifications)Density 1.03 kg/dm
3 DIN 53217Flash point 24 °C ISO 1523Remarks:STM 001G: spreading agent is xylene. Use a paperclip to spread out. Storage conditions:No specific conditions required. Updated: 2013-07-26All information, recommendations and suggestions, concerning the product and its use, are believed to be reliable. However, Nuplex Resins gives noassurance as to the accuracy, completeness, or adequacy for a particular purpose. It is the users responsibility to determine the suitability for its own use of the products. No guarantee (whether expressed or implied) is made by Nuplex Resins as to the results to be obtained from using the described products,nor shall Nuplex Resins be liable for any use by others of the described products. Users are responsible for ensuring compliance with local legislation andfor obtaining the necessary certifications and authorizations. All orders are subject to the general conditions of sale of Nuplex Resins which can bedownloaded from www.nuplexresins.com. Nuplex Resins owns all copyrights and other intellectual property rights in the contents of this document.Reproduction or redistribution in any form is not allowed.Nuplex Resins bv, PO Box 79, 4600 AB Bergen op Zoom, The Netherlands Tel. +31 164 276 911 Fax +31 164 276 258ALUX 1192 SS-60 SETALUX 1192 SS-60DilutabilityAliphatics white spirit not dilutableAromatics xylene partly dilutableSolvesso 100 partly dilutableEsters ethyl acetate dilutablebutyl acetate dilutableKetones acetone dilutableAlcohols ethanol dilutablebutanol dilutableCompatibility% Setalux 1192 SS-60 90 75 50 25 10% of other material 10 25 50 75 90 Supplier Acrylic polyolsSetalux 1151 XX-51 + + + + +Setalux 1152 XX-51 + + + + +Setalux 1156 XS-60 + + + + +Setalux 1184 SS-51 + + + + +Setalux 1186 SS-60 + + + + +Setalux 1187 XX-60 + + + + +Setalux 1753 XS-65 + + + + +Short oil alkydsSetal 84 XX-70 - - - + +Other materialsDesmodur N 75 + + + Bayer AGDesmodur N 3390 + + + Bayer AGDesmodur L 75 - - - Bayer AGDesmodur HL 60 - - - Bayer AGTolonate HDB 75 + + + RhodiaTolonate HDT 90 + + + RhodiaVestanat T 1890 E + + + Degussa AGCAB 531-1 - - - Eastman ChemicalsCAB 551-0.01 + + + Eastman ChemicalsUCAR Vinyl resin VAGH - - - Union CarbideUCAR Vinyl resin VROH - - - Union CarbideNitrocellulose H24 - - - Hagedorn AGRemarkSuitable mixing proportions (calculated on Non-volatiles) are marked '+'. Combinations in the proportions marked '-' are notrecommended.